Home > Knowledge > Content
iron padlock Make it very cautious
- Aug 21, 2017 -

Three ring lock on the marbles, iron padlock a kind of called the shape of the marbles, this shape of the marbles is not easy to toggle, but not to say that absolutely not open, the home of the locksmith, it is still difficult The The lock is the work of the word beads, usually at least one still need standard <on the ball, iron padlock that is, said that there will be more than four hits. The use of the standard on the purpose of marbles, in the lock hole and the hole on the hole can be aligned, so that the key inserted and extracted when more smooth.

Ichong-shaped marbles when the rotation due to the rotation of the lock, iron padlock the workers will be against the bullet eyeball eye shoulder, and can not lift up, that is, back on the ball in the eyes. To solve this problem, to promote the rotation of the rod so that the need to be very cautious, with a very light rotation pressure applied to the marbles, marbles situation is to use a single hook is not tempted, iron padlock you can feel the standard marbles and I-shaped marbles in the retreat On the difference. It is necessary to understand the appropriate playback, (three ring lock in the playback because the lock itself has a stretch, iron padlock so the intensity of playback is not good to master), a kind of call called "push ten back three ", {Make a ratio, to open the direction to promote the 10 degrees, in the playback 3 to 4 degrees}. To relax and even reverse the heart of the rotation force in order to make the bulk off the ball on the edge of the eye block and retracted. However, the lock heart has always been anti, iron padlock but also may have made a good ball on the ball and then down and locked again.

Iron padlock is mainly composed of the lock cylinder, the ball, iron padlock the tongue composition. Between the lock cylinder and the lock body is padded with a row of holes, etc., each hole is equipped with two balls, the top plus spring. When the key is inserted, the two balls in each hole are just on both sides of the joint between the lock cylinder and the lock body, which drives the tongue to slide, iron padlock and it opens. When the key is pulled out or inserted into the other key, the ball in the spring and the role of the key inserted in the lock cylinder and the lock body between the bonding surface, so the lock cylinder can not turn, iron padlock the lock will not open The. All the ball as long as there is a tight in the lock cylinder and the lock body between the surface, the lock can not open.


Previous: Rectangular Padlock More common

Next: No Information