Home > News > Content
Painted Iron Padlock The Key Management System
- Aug 21, 2017 -

Safe padlocks With the management of the function, Painted Iron Padlock a padlock can be equipped with a number of keys, these keys due to the function of padlocks and different permissions, Painted Iron Padlock so divided into a variety of, usually these keys to form a security padlock key management system:

Do not open the key series: each security padlock has a unique key, between the lock and the lock can not be open;

Open the key series: Painted Iron Padlock the development of the group between the security padlock and the security padlock can be opened from each other, Painted Iron Padlock any one or a few keys can open all the padlocks within the group. Can be specified multiple groups, Painted Iron Padlock groups and groups can not be opened between each other;

Different universal key series: the designated group of each security padlock dominates the only key, safety padlock and security padlock can not be separated from each other, Painted Iron Padlock but there is a universal key can open all the security padlock within the group; can be customized multiple groups The master key can not be interconnected, but can be assigned to a higher level Explorer key to open all groups within the padlock;

With the universal key series: group within the same group after opening the key series, Painted Iron Padlock if you need to specify a high level executive to open all groups, can add the same with the universal key.

Padlock is the most commonly used, Painted Iron Padlock and its parts are basically closed in the lock, the basic padlock will not appear on the fault, there are problems are almost used in the outdoor padlock.

    1, the key plug blocked

    This is due to the use of a long time lead to the reasons in the key hole to send some graphite, the most commonly used is the pencil core, do not pour oil inside.

    2, the cylinder does not turn

    Not because of the friction is large, Painted Iron Padlock long-term no padlock, lock cylinder and lock body appeared rust, a small amount of small to the lock cylinder into the diesel and gasoline can solve the problem.

    3, the key card in the lock body

    If the key from the root into the lock body, you can directly with tweezers and other tools folder out. If it is broken from the middle of the lock cylinder, Painted Iron Padlock can only remove the lock on the seven holes in the film, pop up and then loaded, and sealed with aluminum wire.

    4, lock beam does not jump

   Lock beam does not jump mostly due to the lock beam shape and position tolerance is too large, the key into the lock heart, turn to the open position does not move, Painted Iron Padlock with a small hammer gently knock down the lock body or forced down the lock body can be.

    Two, drawer lock

    1, plug and play is not flexible

    This is due to deformation of the pin caused by the lock cylinder axial clearance is too large, Painted Iron Padlock directly remove the lock, you can adjust.

    2, the drawer pushed into the open resistance

    This is the beginning of the installation caused by unreasonable, the drawer on the beam cover groove chisel, the tongue will scratch the tongue side of the tongue, Painted Iron Padlock the excess part of the repair can be restored to normal.

    Unlocking is a technology live, it is important to accumulate experience.