The horizontal lock is a vertical eccentric pin, which is erected by an eccentric shaft. When the lock is required to open, the key will be inserted into the lock cylinder rotation, lock cylinder and key together to rotate, tighten the return spring, lock cylinder to a certain angle, the eccentric pin to eliminate the lock beam of the role of the lock beam in the spring force Under the action of the pop-up, playing to a certain height was beam stopped, the lock was opened.
When the lock beam jumps, the lock cylinder on the eccentric locking shaft was the obstruction of the lock beam, so that the cylinder can not return to the original position, Plated Iron Padlock the key in the cylinder was back to the ball can not pull the obstacles, people call this The phenomenon is "generals do not dismount".
When the lock needs to be closed, with a straight-type safety padlock to close the way to put pressure on the lock, lock beam compression spring into the lock body, Plated Iron Padlock into the locked position, the clamshell to eliminate the lock cylinder eccentric pin obstacles, The role of the spring back to the original position, Plated Iron Padlock eccentric pin will be locked beam lock, to reach the purpose of locking.
The lock has the advantages of simple structure, low price, easy to lose key and so on. But there is also a fatal flaw is low degree of solid, poor anti-theft performance. As the lock beam is single-sided locking, Plated Iron Padlock it is easy to pry the non-locking surface, so that the lock beam was destroyed.
In recent years, many of the consumption of the manufacturers are actively opening up to discuss how to improve the degree of success of the opening, Plated Iron Padlock and consumption of the gap with the security of the padlock. The lock in the original cross-lock on the base to increase the oblique pin, spring, lock tongue, Plated Iron Padlock seal four parts, and the lock manufacturing process has little effect.
When the lock needs to open, the key will be inserted into the lock cylinder rotation, the lock cylinder eccentric pin loss of the lock beam of the ban, the cylinder side of the ribs on behalf of the oblique pin to move up, with the slope to push the tongue, , Revoked the lock beam of the ban, Plated Iron Padlock the lock beam in the role of the elastic jump up, jump to a certain height after being stopped beam.
When the lock demand is closed, press the open safety padlock to close the applied pressure, the lock beam tightening spring into the lock body, the lock cylinder under the action of the return spring reset, on behalf of the oblique lock down movement, the tongue under the action of the elastic Outside the lock, Plated Iron Padlock the lock beam is not forbidden, lock cylinder head eccentric pin is also sold at the same time lock the lock beam, so that the degree of strength than the original cross-lock lock a lot of progress.
Anti-scratch cover: anti-cover cover Mainly from the role of maintenance of the tongue, it is installed in the lock cylinder head, the lock cylinder keyway blockade to prevent foreign body from the key slot toggle the tongue, the goal of. When the lock demand is turned on, the code key is inserted from the keyhole, Plated Iron Padlock and the bottom of the ball is aligned with the center of the lock cylinder. The flat bottom of the ball and the ball are aligned at the circumference of the cylinder. Core and lock body of the obstacles. Turn the key clockwise, the lock cylinder with the key together with the rotation (the angle of rotation by the lock pin control), the cylinder behind the claws toggle the tongue, the tongue tightening the role of the tongue out of the force, Plated Iron Padlock Toggle the claws on the lock cylinder so that the lock cylinder is rotated counterclockwise, and it is locked by the lock cylinder when it is turned to the original position. At this point all back into the center of the lock cylinder, flat head into a part of the lock cylinder, a part to stay in the lock body, the lock lock. When the lock demand is closed, Plated Iron Padlock the lock beam on the door nose, the pressure on the bottom of the lock body or hand on the lock at the same time after the force, forcing the lock beam to move the lock body. Plated Iron Padlock The locking beam restrains the spring force and shrinks the squeeze to the lock body. Lock beam into the lock body, Plated Iron Padlock the role of the tongue in the elastic force out of the out, the lock beam ban, to achieve the purpose of blocking.
- Iron Padlock Internal Structure
- Rectangular Padlock Locking Mechanism
- Brass Padlock How To Buy
- Grey Iron Padlock The Anti-theft Pe...
- Painted Iron Padlock The Key Manage...
- Plated Iron Padlock Models And Feat...
- Side Open Iron Padlock Unlock Method
- Camel Type Iron Padlock Very Wide
- Square Iron Padlock And Its Importance
- ARC Iron Padlock Of The Series
- Focus On 122nd Canton Fair By Tri-R...
- Padlock Can’t Open Easily, What To Do?
- Detailed Annotation In Padlock Clas...
- Padlock Order Finished Delivery For...
- Two Container Order For Egypt Custo...